Dangerous gases can build up in a home, and newer homes, with modern and almost airtight sealing, are even more prone to this danger. Radon is one of these gases.
It is a radioactive gas that is the product of uranium decaying. Uranium exists in small amount in many soils. A small amount of radon is harmless, but too much can be dangerous.
Radon can be measured, especially in the basement with an inexpensive device that is designed for this purpose, to make sure the levels are not too high. If the levels are too high, a professional will have to be consulted. The EPA considers 4 picocuries or over a level where action needs to be taken.
If you are planning a basement remodelling, make sure you have adequate venting to avoid buildup of this gas. If you do have radon, small amounts won’t harm anyone, unless is it over a prolonged period.
Other gases that can be harmful are carbon monoxide and nitrogen dioxide. These are produced when a gas stove is not ventilated well, or when appliances such as gas dryers and water heaters have not been properly installed. Wood stoves are also a source of carbon monoxide and nitrogen dioxide.
If you are putting in any such appliances, be sure to carefully follow the directions. Keep all of the ducts clean and make sure the connections are tight.
There are detection devices for NO2 and CO, just as there are for radon.
In addition to gases, some common elements in the home can also be dangerous to our health. Dust is a major culprit.
If you a buying a new vacuum, get one with a HEPA filter. If you are doing a renovation, you will surely kick up a lot of dust if you are replacing cabinets, tearing up carpets or tearing down walls. Vacuum frequently during the project to keep the dust levels down.
Dust mites are responsible for many people’s allergic reactions. You can minimize the impact of dust mites. They live in the dust that naturally builds up on our carpets, curtains and furniture. Vacuuming frequently will keep this problem to a minimum, and make sure you always wash curtains, bedspreads and sheets in very hot water to destroy dust mites. If it is not recommended to wash the material in hot water, you can use a spray designed to kill mites and also stop them from reproducing. A good filtration system will help keep down the level of dust mites in your home.
There are other creatures living in your home with you and your family. Mildew and mold are living organisms that grow best in dark, damp spaces. Ducts in homes are a perfect spot for them, so if your renovation includes replacing duct work, you will be releasing a lot of mold and mildew into the home.
Changing filters frequently and keeping the ducts from your HVAC system clean will help with the mold and mildew problem. If you use these common sense tips, you will be able to keep your home healthier. Yes, we can be healthier, but we have to work at it.
By: Adam Peters
Posts Tagged ‘Curtains’
Keeping Your Home Safe and Allergy Free
May 5th, 2010Wooden Shutters – Interior Shutters for Home, Office, Restaurant, Cafe
April 25th, 2010
Why have Timber Shutters instead of Curtains?
Curtains have been increasingly under siege now for many years – and it’s not hard to see why. For hundreds of years they were a great idea – indeed the best, if not only idea – for dressing windows, retaining warmth and maintaining privacy. But times have changed and 21st century alternatives leave curtains in the shade.
There have been a number of pretenders to the throne but, of all the alternatives available, wooden plantation shutters have emerged as the clear winner. It’s not hard to see why, since they are practical, aesthetically pleasing and long lasting.
What’s more, unlike curtains, they provide good insulation against noise – a real benefit, especially for anyone living near a busy road. And shutters come in a variety of styles and finishes to suit every style of home – or office – from a centuries-old country cottage to a space-age loft apartment.
It’s not surprising that they are practical – they get their name from the popular design of shutters found on American plantations where protection from intense heat and light is of primary importance.
They are made by hinging a number of panels together, which enables them to fold back. And whereas the original plantation shutters used in America’s deep south had fixed slats, today’s shutters have slats – or louvres – that can be easily adjusted to admit as much air or light as required.
Traditionally, of course, these window coverings were fitted externally. These days, however, for practical reasons they are normally fixed inside. And the good news is that they can be made to fit virtually any size or shape of window or French door.
So, there is no doubt they meet all the criteria for a practical window covering. What about looks? Well, they certainly can’t be faulted in that department! Wooden shutters are a design classic. And the choice is extensive – from the wide range of woods to the colour or stain with which they are finished. Whatever your style of furnishing or colour scheme you can co-ordinate plantation shutters with ease. And when you change your colour scheme you won’t have to change your window covering – unlike curtains, shutters don’t ‘date’ and they certainly don’t clash!
But the superiority of shutters over curtains doesn’t stop there. Curtains require washing or dry-cleaning – and you have to take them down first! Shutters stay in situ and just need a quick flick with a duster. And, of course, while dust gets into the very fabric of curtains, contributing to or aggravating allergies, there is no danger of this with shutters.
Anything else? Well, curtains fade and the material eventually rots, whereas shutters are virtually indestructible.
It’s all or nothing with curtains – open or closed. Shutters can be adjusted to your exact requirements and an advantage of this is that strong sunlight, the number one cause of fading furnishings, furniture and pictures, can be excluded without cutting out all light.
Curtains have had a good innings. They have served us well but there’s no doubt that it’s time to move on. It’s a case of RIP curtains, long live shutters!
Is this the end of the line for curtains
By: Barry Dunlop
Practical Home Improvement – Soundproofing Techniques
March 28th, 2010
One of the most welcomed, and most valuable, of all home improvements is creating a quieter world in which to live. We all know that the modern world is a noisy place, and making it a little bit quieter will go a long way.
There are many techniques for soundproofing a single room or an entire home, and which ones are appropriate will depend in large part on the location of the home, the nature of the noise problem, and of course the budget of the homeowner.
For new construction, one of the most effective noise proofing techniques is to stagger the location of the doorways so that they are not directly opposite one another. This will keep the sound from traveling directly across hallways and reverberating around the home. It is also a good idea for at least one quarter of each room to include some sort of absorbent material, be it carpet, curtains, or furniture. It is also possible to install a soundproofing mat on the walls and the ceilings.
If noise from squeaking floors on the upper floor is the problem, it can be solved by taking down the ceiling on the lower floor and placing triangular wood strips on the flooring above and an the floor joists. In addition, liquid adhesive can be used to keep the flooring from moving around and causing squeaks.
Another popular soundproofing technique is to use two sets of disconnected wall studs to frame back to back walls. In addition, the use of fiberglass installation will help to absorb sound.
For traditionally framed houses, the wall framing and the covering drywall will transmit noise from through the wall to the other side. This is because the wall studs transfer the noise which bounces off the drywall in one room through the stud and into the drywall which is mounted on the back of the same stud in the other room.
Simply by inserting fiberglass installation bats, the sound will be dampened but not completely eliminated. For greater noise elimination, it will be necessary to use separate studs for each wall, therefore stopping the noise from being transmitted room to room.
Using double paned glass and vinyl frames for windows is another good way to soundproof a home. These double paned windows will cost a little bit more, but they are worth it in the long run. Adding shutters to the interiors of the window can be a big help as well.
By: Brooke Sikula