Home Improvement » Handyman

Your Home Improvement Project – Questions You MUST Ask a Contractor

admin — Mon, 24 May 2010 21:56:36 +0000

Choosing a reliable, quality-conscious, home improvement contractor is the most important part of any project. Proper planning, doing the necessary research, and having lots of patience will help to ensure your dream project will not become a living nightmare. Once you have narrowed down the list of contractors (3 or 4) you want to consider for your project, it’s time to start getting to know them better…much better! Plan a pre-construction meeting at the project site with each contractor individually and ask lots of questions.

Here is a sampling of some questions to ask the contractors you are considering. These will help get you started:

How will you approach a project like mine? This will give you an idea of how the contractor works and what to expect during the project. Listen carefully to the answer. The contractor’s work ethic and other traits can be uncovered listening to the answer.

Have you completed many projects like mine? This will help you determine the contractor’s familiarity with projects like yours.

Will I need a permit to do my project? Your contractor should know the answer to this question and be the one getting the permit.

How long have you been in this business? Seek out a local company or craftsman with experience in your community. A minimum of 5 years experience as a business owner is acceptable if everything else checks out.

Do you have employees or do you hire subcontractors? Or both? Who will be overseeing the project? It is good to know what parts of your project will be handled by whom.

Who do I speak with if I have a question or concern? Get exact names and contact phone numbers for all persons who will be involved with your project. It is best to speak with the owner if at all possible.

Are you properly equipped and qualified to do a project like mine? You may be able to hire a handyman to do your project if it is small enough and does not require special training or licensing. If your project requires multiple trades it may be wise to consider a full service company.

What kind of insurances does your company carry? Ask for copies of the insurance certificates to verify coverage. If they employ workers they will need workers’ comp coverage along with general liability. Get the name of their insurer and contact them yourself to verify the coverage is intact.

Are you licensed to do my project? If your state does have contractor licensing laws ask for a copy of the contractor’s license, then confirm the license number and expiration date with your local jurisdiction. Plumbers, electricians and those who work with hazardous materials are the only trades in Maine that need a license to operate.

Do you do a substantial amount of repeat and referral business? This will give you a good idea about the company’s customer satisfaction.

May I have a list of your recent references? The contractor should be able to supply you with a minimum of three references, including names, phone numbers and addresses. CALL THEM! Ask lots of questions. DIG DEEP…and try to see if they might even let you come see their finished project. People who are satisfied with their contractor and proud of their project results like to show them off.

Yes…there are a lot of questions-and others will arise the more you speak with the contractors. Of the many questions you can ask during an interview, the most important question is one you must ask yourself: “Do I feel comfortable with and trust the person I am about to hire?”

Your answer to that question should help make the hiring decision a little easier. Also, remember that reliable, quality-driven contractors are busy for a reason…they are good at what they do and they are worth waiting for…so PLAN and be PATIENT!

By: Paul G Lawrence

Dumbwaiters in the Home

admin — Fri, 16 Apr 2010 07:04:55 +0000

Over the past few years more and more people have discovered the wonders of a residential dumbwaiter. Dumbwaiters are similar to elevators except that they are much smaller and are made to carry materials rather than people. Dumbwaiters have been in use for many hundreds of years and have countless commercial applications. They are commonly found in hospitals, restaurants, hotels, and office buildings. Up until recently they were usually found only in larger homes because of their cost. The price has dropped dramatically, however, and many Americans have taken advantage of this price drop in order to take advantage of the many practical uses associated with dumbwaiters.

Dumbwaiters have many uses, but they are most commonly used to transport groceries to the kitchen, send the dinner upstairs, and to transport laundry and bedding to and from the laundry room. Typically residential dumbwaiters can support 50 to 150 pounds, but it is better to go with a model that will carry at least 100 pounds. 50 pounds may sound like a lot, but it is not as heavy as it sounds.

While it is easier to build the dumbwaiter into a house when it is being constructed, most units are made to easily be installed in existing homes. If you decide to install a dumbwaiter it is important to consider the buildings existing structure. It usually does not present a problem, but it is important to ensure that there is room for a straight shaft between floors. The motor used in most residential dumbwaiters is small enough that it is rarely necessary to cut into the attic to install the dumbwaiter. People often install the dumbwaiters in closets or at the end of a hallway because there is usually enough space for the shaft in these locations and it can be installed rather painlessly. Dumbwaiters can be configured with a variety of door arrangements, so it is possible to have the dumbwaiter open on different sides on each floor.

It is possible for a competent handyman to install a dumbwaiter system, but it takes a good deal of technical know-how. Most dealers have certified installers that can quickly and inexpensively install your dumbwaiter, which for many is the best way to do it. If you do decide to install the dumbwaiter yourself, than ensure that you have completely read and understand the instructions that come with your dumbwaiter. Do not feel rushed either, because it is much better to take your time and do it right the first time. Electric dumbwaiters travel along a track which will need to be secured to the studs and must not be secured to only drywall. A good set of tools will be needed that includes a power drill, circular saw, drywall saw, socket set, and measuring tape.

Once you have installed your dumbwaiter it will provide many years of service, but ensure that you follow all manufacturers’ service and maintenance recommendations. Dumbwaiters provide a very valuable service in millions of homes across the United States. They are responsible for reducing the workload and strain that can come from lugging clothes, food, and household materials between floors and are responsible for adding resell value to your home.

By: Brad Brubaker

Building Your Own Home Sauna

admin — Thu, 28 Jan 2010 03:08:47 +0000

If you would enjoy owning your own home sauna but find the cost prohibitive, you may want to consider actually building your own sauna. If you are a decent handyman and can follow directions it will probably be pretty easy for you to get your own sauna built in no time. Before you start building you should consider any special needs for your sauna, whether you want a modular sauna or a pre-cut kit, and also be aware of any special warnings or precautions you need to be aware of.

Special Needs

Before you get started on your home sauna there are a few special needs that you need to be aware of. First of all, you will need to know what size you want your sauna and if you want to have it inside or outside of your home. If you only want a small sauna for two people, then you will only need to build it large enough to allow 2-3 feet of space on the bench for each person. You should also know, that while you will not need a water hookup for the home sauna, you will need to be sure that there is an available electrical circuit, which will be needed to operate the heater for your home sauna.

Constructing a Modular Sauna

One option that you will have for building your own home sauna is a modular sauna. This is a great choice for people who do not want to do as much work or who are not qualified enough to use a pre-cut kit. A modular sauna comes with most of the work already completed and your only job is to put it together. This is also a great choice for those who relocate often, since you are able to easily disassemble this type of a sauna so it can move with you. Usually everything you need for your sauna, including the heater, will come with your modular sauna kit.

Using a Pre-Cut Kit for Your Sauna

Those who have a bit more experience with building may want to choose a pre-cut kit for building their home sauna. While this will take a bit more time for you to construct, it will also save you a great deal of money as well. The great part about using a kit is that all the boards and necessary trimmings come with the kit, so you do not have to worry about going out and buying the right amount of materials. You will only want to use this type of a kit if you are proficient at building, or you may mess up on the project and it may be difficult to replace the materials.

Warnings

There are a few precautions and warnings that you should keep in mind when you are building your own home sauna. First of all, all the electrical components you use should be UL rated for your safety, and unless you are an electrician, you should leave the wiring to someone else who is an electrician. Also make sure that the door is easy to open and that no locks are used on this door to prevent someone from accidentally being locked in. It is also highly important that no paint or stain is used on the inside of the sauna or the steam may cause there to be very harmful fumes. Keep these warnings in mind as you build and you will be able to construct a great Finnish sauna for your relaxation and enjoyment.

By: Thomas Oak